Update the appearance of a floor, wall, or backsplash with peel-and-stick tiles while avoiding some common mistakes.
When the kitchen, bathroom, or another room like the basement needs a bit of a facelift, but you don’t have the time or money to spend on laying a tile floor or wall, consider using peel-and-stick tile. The installation process is easy enough that most DIYers can take on this job, instead of having to hire a professional. Peel-and-stick tile can be made from vinyl, glass, and even metal. These tiles have an adhesive backing that sticks to a variety of surfaces, ensuring a quick and effective floor update or backsplash installation.
However, the strong adhesive on the back of the tile also can cause problems if the surface isn’t properly prepared or if the area isn’t measured and planned out. These issues can include cracked or broken tiles, twisted tiles, and mismatched patterns. Keep reading to find out how to avoid these issues and for more tips on how to use peel-and-stick tile.
1.DO prepare the wall surface properly.
Before diving into any tiling project, it’s imperative that the wall or floor is properly prepared. A clean level surface allows the tile to stick. To prepare the surface, sand or scrape away any old adhesive or protrusions that may prevent the new tile from lying completely flat, then clean the wall or floor using a degreaser if necessary. Peel-and-stick tiles can be used on painted drywall, existing linoleum, ceramic, concrete, and many other common wall and floor materials.
However, if the tile is being installed over existing ceramic or marble, the grout seams need to be flush to the top of the tile. Otherwise, the peel-and-stick tile will adhere to the indentations, leaving an uneven finish. Tiles that don’t stick to the indents will lay flat against the wall, but the gap between the tile and the grout seam still exists. These gaps can be a breeding ground for mold and mildew and they may also cause the tiles to fall off the wall. It’s a better idea to fill the grout lines with more grout before installing the new tile to ensure that you are working with a clean and smooth surface.
2.DON’T just start installing from the top of the wall.
Peel-and-stick tiles are very easy to use, but this simplicity can often lead to mistakes when users decide to dive into the project without properly measuring the space or creating a layout. Whether you are installing a small backsplash or an entire floor, it’s integral that the entire surface area is measured before beginning to know the number of tiles that are necessary for the project and to determine whether there will be any half or partial tiles needed to fill in small gaps along any of the sides.
When you have the tiles necessary for the project, place a full row of tiles in position without removing the protective backing. This simple step lets you see how the tiles will lay when they are installed, so you can plan the appropriate layout for the project and visually determine how to deal with obstacles and where half or partial tiles should be installed. It’s advised to place these partial tiles in discrete locations, like a corner or the base of the wall, where the deviation from the pattern is difficult to discern.
3.DO use a sharp knife to make precise cuts.
Most peel-and-stick tile installations will require some alterations to the tiles so that they properly fit in the given area. Whether this is cutting a tile completely in half to fit along the base of a wall or cutting a notch from a corner to allow the tile to fit tightly up against a cupboard, sink, or tub it’s important to use a sharp utility knife to make the cuts.
Dull tools can damage the tile, leaving unsightly scratches and blunt edges. To ensure the precision of the cut, use a sharp utility knife and always place a protective piece of wood (or similar protective material) underneath the tile while cutting. This allows the user to cut cleanly through the tile without having to worry about the knife damaging a workbench, counter, or any other surface.
4.DON’T peel off all backing paper at once.
The paper on the back of peel-and-stick tiles is typically referred to as backing paper. While it may seem appropriate to simply remove the backing and place the tile like you would a sticker, it’s actually a better idea to only peel half of the backing paper. The reason for this is that the backing paper has arrows to indicate the orientation of the tile. For the best results, the tiles should be laid according to the arrows on the backing paper, ensuring that all tiles are installed in the same orientation.
If one tile is facing a different direction than the rest of the tiles, it will likely stand out, though there are patterns that are completely symmetrical on all sides. The backing paper also helps to protect the adhesive, so it’s recommended to peel the backing paper from one edge of the tile, then begin to lay the tile in the proper place and orientation. As the edge makes contact with the surface, continue to remove the paper until the entire back is exposed and the tile is laying flat against the surface of the wall or floor.
TBC...
Comments